SEAL-UP
Seal-Up – The world’s best-selling permanent block sealer –
contains pure copper to seal any or “all kinds” of leaks in
radiators, engine blocks, cylinder heads, head gaskets and
even industrial cooling systems.
Seal-Up forms a permanent copper-ceramic seal that can
withstand temperatures of 200 degrees F and pressures of
300 PSI.
Our specially formulated product contains copper for its
great strengthening properties. It also transfers the heat
across the crack so you don’t get any hot spots.
SEAL- UP INSTRUCTIONS
Part Number 1008 – Use in systems up to 6 gallon capacity
Part Number 1116 – Use in systems above 6 gallon capacity
IMPORTANT: SEAL – UP WILL CLOG COOLING SYSTEM IF ANTIFREEZE IS PRESENT.
INSTRUCTIONS:
1. Drain and flush cooling system.
2. Fill radiator with water, replace radiator cap, idle engine until normal operating temperature is achieved.
3. With engine running, carefully remove radiator cap and add water to cover radiator core.
4. Shake SEAL – UP and pour into radiator. (Pour into cooling system only.)
5. Replace radiator cap and idle until leak stops (20 minutes minimum).
6. Stop engine, carefully remove radiator cap and open drain plugs.
7. Allow engine to sit for 12 hours (minimum 4 hours).
8. Flush remainder of SEAL – UP and water from engine.
9. Refill cooling system with proper mixture of water and coolant.
For a repair that lasts, insist on the best….
Seal-Up.
|
 |
